SKU:
EL-EAP1300
EAP1300 - EnGenius EnTurbo AC1300 Wave 2 Indoor Wireless AP - Discontinued Item
£166.70
(inc. VAT)
9 in stock for next day delivery
- Quad-Core Processor, 717 MHz “Turbo Engine”
- 11ac Wave 2 Wireless Speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
- Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs
- 802.3af PoE Compliant
- 360° omni-directional antennas
- Multiple operation modes
- Works both in standalone mode or managed via EWS switches or ezMaster as part of the EnGenius Wireless Neutron Management Solution
- Discounted/Used item on clearance page
User Manual
(3.13 MB)
CE Declaration of Conformity
(228.35 KB)
- Access Point Type: Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back- wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is backwards compatible with 802.11 b/g.
- SU-MIMO: Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device.
- MU-MIMO: Two(1) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) MU-MIMO capable wireless client devices simultaneously.
- Frequency Radio: 2.4GHz: 2400MHz ~ 2835MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain.
- Supported Radio Technology: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 2x2 MIMO with 4 streams 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz 802.11n supports high throughput (HT) — HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac packet aggregation: A-MPDU, A-SPDU
- Supported Modulation Type: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- Transmit Power (Maximum Value): 2.4GHz: 21dBm 5GHz: 21dBm Maximum power is limited by regulatory domain
- Maximum Power Consumption: 10W
- Power Source: Direct DC Input: 12V/1A Power Over Ethernet: 802.3af Input
- Antenna: (Integrated Antenna) 2.4GHz: 5 .0 dBi 5GHz: 5.0 dBi
- Networking Interface: One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports
- DC Powering Interface: One (1) DC Jack interface
- LED Indicators: Display system and wireless transmission status
- Reset Button: Convert Access Point to the Factory default or the Users Default
- Mounting: Ceiling Mounting Assemble a mounting bracket for drop ceiling Wall Mounting Mount Access Point on a flat wall
- Dimensions: Diameter : 6.36" (161.54 mm) Height : 1.64" (41.66 mm)
- Weight: 336g
- Certifications: FCC, CE