RUT950 Teltonika Dual SIM 3G/4G M2M Cat4 LTE router 4G/LTE up to 150 Mbps Download and 50 Mbps Upload IEEE 802.11b/g/n WiFi with 2x2 MIMO up to 300 Mbps IEEE 802.3 and IEEE 802.3u standards Four Ethernet ports Dual SIM (does not feature aggregation - for failover only) Takes standard size SIM card Paired with the XPOL1 antenna from Poynting this is an ideal kit to share your 4G connection Last few in stock, once they're gone they're gone - 12-month warranty for units sold from April 2024 Manufactured in Europe Remote Management System available - click here for free demo Discounted/Used item on clearance page Authorised Distributor » Price("4G-RUT950") Stock("4G-RUT950") 4G-RUT950 4G-RUT950 Teltonika Router KitPrice(["4G-RUT950","TL-ROUTER_12MNTH_LCNS"]); KitStatus(["4G-RUT950","TL-ROUTER_12MNTH_LCNS"]); 4G-RUT950 & 12 Months Remote Management System Credits In the 'extra information' section on the checkout page, please provide us with an Admin email address. Teltonika RMS Info
- 4G/LTE up to 150 Mbps Download and 50 Mbps Upload
- IEEE 802.11b/g/n WiFi with 2x2 MIMO up to 300 Mbps
- IEEE 802.3 and IEEE 802.3u standards
- Four Ethernet ports
- Dual SIM (does not feature aggregation - for failover only)
- Takes standard size SIM card
- Paired with the XPOL1 antenna from Poynting this is an ideal kit to share your 4G connection
- Last few in stock, once they're gone they're gone - 12-month warranty for units sold from April 2024
- Manufactured in Europe
- Remote Management System available - click here for free demo
- Discounted/Used item on clearance page
- Frequencies Click here for definitions: RUT950 Europe, the Middle East, Africa, Korea, Thailand, India Version
- Mobile: 4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50 Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS
- Ethernet: 4 x 10/100 Ethernet ports: 1 x WAN (configurable as LAN), 3 x LAN ports
- WiFi: IEEE 802.11b/g/n WiFi standards 2x2 MIMO AP and STA modes 64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods 2.401 – 2.495GHz WiFi frequency range 20dBm max WiFi TX power SSID stealth mode and access control based on MAC address
- Connectors: 1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA
- Software: OpenVPN, IPSec, GRE, L2TP, PPTP Backup WAN PPPoE Dynamic DNS SMS and Ping reboot, periodic reboot Status, configuration via SMS Send/read SMS via HTTP POST/GET Monitoring by SNMP, SNMP trap System log to record the status of the router VRRP Web filter Wireless hotspot with or without radius server SIM card switch controlled by signal, data limit, roaming Configuration profiles Dual image with safemode firmware Firmware update from bootloader via WebUI Restore point
- PoE: The RUT950 supports passive poe on lan port 1. This is NOT 48V. Voltage is 7-30VDC You need to supply passive poe to LAN port 1. At the injector end you would need the POE-EPE1212 and for the power supply you could use the PSU095 mentioned on the EPE-1212 page (you could use a lower voltage but 24V will give you the longest lan cable before degradation of the power). Note poe is lan port 1 only and NOT 48V.
- Dimensions (H x W x D): 100 mm x 110 mm x 50 mm
- CPU: 550 MHz
- Weight: 256g
- Power supply: 9 – 30 VDC, 4 pin DC connector
- Power consumption: < 7W
- Operating temperature: -20° to 55° C
- Storage temperature: -20° to 70° C
- Operating humidity: 10% to 90% Non-condensing
- Storage humidity: 5% to 95% Non-condensing