Call: 0845 862 8000

OpenVox D110E ISDN PRI/E1 PCI-Express

OpenVox D110E ISDN PRI/E1 PCI-Express

SKU: D110E

The OpenVox D110E is a half length ISDN (Integrated Services Digital Network) PRI (Primary Rate Interface) PCI (Peripheral Component Interconnect) card. The D110E provides a single span PRI/E1/T1/J1 port, which makes it an ideal cost effective option for small to medium sized enterprise applications. OpenVox are a Fonality® Authorized / Certified Ecosystem (FACE) partner and the OpenVox D110E is officially certified for use with Trixbox®.

The OpenVox D110E supports industry standard telephony and data protocols, including both Robbed-bit Signaling (RBS) and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features. The OpenVox D110E is 100% hardware compatible with Digium® TE110P/TE120P and uses the same Zaptel/Dahdi wcte11xp device driver.

Standard PC (Personal Computer) hardware can be used along with D110E cards to provide a low cost migration path from legacy ISDN PBXs towards an Open Source IP PBX based solution. The D110E is compatible with leading open source IP PBX software such as Asterisk®, Trixbox®, and Elastix® (OpenVox are an Elastix® Strategic partner), which support all the sophisticated features of expensive high-end PBX/Voicemail platforms. Although developed primarily for Open Source IP PBX Asterisk® based applications, the D110E can be used for any Linux applications/systems that require ISDN connectivity, e.g. Linux ISDN firewalls, VoIP gateways and routers.

  • PCI-Express interface for high performance voice and data applications
  • Industrial Grade Surface Mounted Electronic Components: Minimal Signal Interference, Reduced Heat Transference and Increased Reliability
  • Solid tantalum capacitors: High volumetric efficiency/reliability, low Equivalent Series Resistance (ESR) and temperature stability over the range -55°C to +85°C
  • Crystal-less wander and jitter attenuation/compensation according to TR 62411 and ETS-TBR 12/13
  • Data and clock recovery using an integrated digital phase-locked loop
  • Maximum line attenuation up to -43 dB at 1024 kHz (E1) and up to -36 dB at 772 kHz (T1/J1)
  • Meets the following Jitter Specifications: ITU-T I.431, G.703, G.736 (E1), G.823 (E1) and AT&T TR62411 (T1/J1)
  • Uses latest RoHS compliant Infineon FALC®56 E1/T1/J1 Framer and Line Interface Component (PEF 2256 H V2.2)
  • Dimensions excluding PCI bracket (H x L x W): 64mm x 122mm x 15mm / 2.5 " x 4.8" x 0.6"
  • ROHS compliant: No lead in the Printed Circuit Board (PCB) or parts
  • Certificates: CE, FCC
0
£218.99
SKU: D110E
£218.99
100 available

Related products

OpenVox B100P 1-port ISDN BRI PCI
£55.99
OpenVox B400P 4-port ISDN BRI PCI
£277.99
OpenVox D210P 2-port ISDN PRI/E1/T1 PCI
£343.99